Swing Beam Hydraulic Shearing Machine
Match hydraulic swing-beam shearing to the actual plate and a specific model row. Review handling alongside cutting capacity.
- Source configurations
- 42 rows
- Width entries
- 2500–8000 mm
- Thickness entries
- 4–30 mm
Select a real row from the industrial cutting envelope
Material and thickness
The 42 supplied rows span listed maximum thicknesses from 4 to 30 mm. Confirm the material-strength basis before choosing a thickness class.
Plate width
Widths vary within each class. The 8000 mm entry is 12×8000; the 30 mm entry is 30×2500. These separate extrema must not be combined.
Handling and positioning
Backgauge maxima vary between 600, 800 and 1000 mm. Review sheet support, cut dimensions and the outgoing plate route.
A model comparison that exposes the tradeoff
| Model | Width / thickness reference | Strokes / motor |
|---|---|---|
| 4×2500 | 2500 mm / 4 mm | 18 per minute / 4 kW |
| 12×8000 | 8000 mm / 12 mm | 5 per minute / 37 kW |
| 30×2500 | 2500 mm / 30 mm | 4 per minute / 55 kW |
Understand the swing-beam route
Blade carrier and process fit
The supplied page describes an upper blade moving through a controlled arc under hydraulic drive. Specify the material, blank geometry and required edge condition, then agree a representative cut.
The cutting-angle entries are model references. They do not establish an adjustable rake-angle range for every swing-beam model.
Complete 42-Row Swing-Beam Reference
Open the complete supplied model table
| No. | Model | Max Cutting Thickness (mm) | Max Cutting Width (mm) | Cutting Angle (°) | Ram Strokes (n/min) | Backgauge Range (mm) | Motor (kW) | Machine Size (mm) |
|---|---|---|---|---|---|---|---|---|
| 1 | 4×2500 | 4 | 2500 | 1.3 | 18 | 20–600 | 4 | 3150×1650×1700 |
| 2 | 4×3200 | 4 | 3200 | 1.3 | 18 | 20–600 | 5.5 | 3840×1675×1600 |
| 3 | 4×4000 | 4 | 4000 | 1.3 | 12 | 20–600 | 5.5 | 4640×1850×1750 |
| 4 | 4×5000 | 4 | 5000 | 1.3 | 10 | 20–600 | 7.5 | 5660×2050×1900 |
| 5 | 4×6000 | 4 | 6000 | 1.3 | 7 | 20–800 | 7.5 | 6730×2250×2500 |
| 6 | 6×2500 | 6 | 2500 | 1.3 | 18 | 20–600 | 7.5 | 3130×1675×1600 |
| 7 | 6×3200 | 6 | 3200 | 1.3 | 14 | 20–600 | 7.5 | 3840×1675×1620 |
| 8 | 6×4000 | 6 | 4000 | 1.3 | 14 | 20–600 | 7.5 | 4630×1850×1700 |
| 9 | 6×5000 | 6 | 5000 | 1.3 | 12 | 20–800 | 11 | 5660×2050×1950 |
| 10 | 6×6000 | 6 | 6000 | 1.3 | 10 | 20–800 | 11 | 6700×2300×2300 |
| 11 | 8×2500 | 8 | 2500 | 1.3 | 12 | 20–600 | 11 | 3130×1530×1600 |
| 12 | 8×3200 | 8 | 3200 | 1.3 | 10 | 20–600 | 11 | 3840×1675×1620 |
| 13 | 8×4000 | 8 | 4000 | 1.3 | 8 | 20–600 | 11 | 4630×1850×1700 |
| 14 | 8×5000 | 8 | 5000 | 1.3 | 7 | 20–800 | 15 | 4630×2050×1950 |
| 15 | 8×6000 | 8 | 6000 | 1.3 | 6 | 20–800 | 15 | 6750×2330×2230 |
| 16 | 10×2500 | 10 | 2500 | 1.3 | 12 | 20–600 | 15 | 3130×1580×1800 |
| 17 | 10×3200 | 10 | 3200 | 1.3 | 10 | 20–600 | 15 | 3840×1725×1850 |
| 18 | 10×4000 | 10 | 4000 | 1.3 | 8 | 20–600 | 15 | 4650×1900×1850 |
| 19 | 10×5000 | 10 | 5000 | 1.3 | 8 | 20–800 | 15 | 5600×2000×1950 |
| 20 | 10×6000 | 10 | 6000 | 1.3 | 8 | 20–800 | 18.5 | 6800×2100×2050 |
| 21 | 12×2500 | 12 | 2500 | 1.3 | 12 | 20–600 | 18.5 | 3235×2045×1935 |
| 22 | 12×3200 | 12 | 3200 | 1.3 | 10 | 20–600 | 18.5 | 3945×2227×2115 |
| 23 | 12×4000 | 12 | 4000 | 1.3 | 8 | 20–600 | 18.5 | 4695×2227×2200 |
| 24 | 12×5000 | 12 | 5000 | 1.3 | 7 | 20–1000 | 22 | 6100×3370×3050 |
| 25 | 12×6000 | 12 | 6000 | 1.3 | 6 | 20–1000 | 30 | 7100×3370×3050 |
| 26 | 12×8000 | 12 | 8000 | 1.3 | 5 | 20–1000 | 37 | 8880×2480×3000 |
| 27 | 16×2500 | 16 | 2500 | 2 | 8 | 20–600 | 22 | 3235×2050×1985 |
| 28 | 16×3200 | 16 | 3200 | 2 | 7 | 20–600 | 22 | 3395×2230×2158 |
| 29 | 16×4000 | 16 | 4000 | 2 | 6 | 20–600 | 22 | 4800×2330×2258 |
| 30 | 16×5000 | 16 | 5000 | 2 | 5 | 20–1000 | 30 | 6200×2430×2358 |
| 31 | 16×6000 | 16 | 6000 | 2 | 4 | 20–1000 | 30 | 6200×2530×2458 |
| 32 | 20×2500 | 20 | 2500 | 2.3 | 6 | 20–600 | 30 | 3300×2160×2540 |
| 33 | 20×3200 | 20 | 3200 | 2.3 | 5 | 20–600 | 30 | 4930×2300×2710 |
| 34 | 20×4000 | 20 | 4000 | 2.3 | 4 | 20–600 | 30 | 4750×3300×2800 |
| 35 | 20×5000 | 20 | 5000 | 2.3 | 4 | 20–1000 | 37 | 6000×3400×2900 |
| 36 | 20×6000 | 20 | 6000 | 2.3 | 4 | 20–1000 | 37 | 7050×3480×3080 |
| 37 | 25×2500 | 25 | 2500 | 2.3 | 5 | 20–600 | 37 | 3500×3150×3500 |
| 38 | 25×3200 | 25 | 3200 | 2.3 | 4 | 20–600 | 37 | 4200×3150×3500 |
| 39 | 25×4000 | 25 | 4000 | 2.3 | 4 | 20–600 | 45 | 4850×3300×3500 |
| 40 | 25×5000 | 25 | 5000 | 2.3 | 4 | 20–1000 | 45 | 6000×3400×3600 |
| 41 | 25×6000 | 25 | 6000 | 2.3 | 4 | 20–1000 | 45 | 7050×3500×3700 |
| 42 | 30×2500 | 30 | 2500 | 3 | 4 | 20–600 | 55 | 3500×3150×3500 |
Retain the selected row as the quotation reference. Some footprint entries warrant drawing confirmation: for example, the 8×5000 row lists 4630 mm machine length. Obtain the selected model’s approved layout instead of planning from that value alone.
Long-plate installation review
- Incoming platePlate dimensions, loading method and front support.
- Outgoing partsPart mass, offcut support and collection space.
- Machine layoutApproved footprint, access and destination electrical requirements.
- Acceptance cutGrade, thickness, width, dimensions and the agreed edge condition.
Questions to settle before ordering
Can one model combine 30 mm and 8000 mm?
No such combination is listed. Those maxima belong to different rows.
Is every listed cutting angle adjustable?
The supplied table lists model angles; it does not confirm an adjustable range for each model.
Are stroke rates finished-part output?
No. Plate positioning and handling must be included.
Can I plan the floor from the table alone?
Obtain an approved layout for the selected model, particularly where a source dimension appears inconsistent.
What information should accompany the plate sample?
Material grade, thickness, width, blank dimensions, cut-quality requirements and utilities.
Tell Us Your Hydraulic Shearing Requirements
Send your plate material, maximum thickness, cutting width, production needs and electrical standard so we can recommend the suitable swing beam hydraulic shear.