Manual Shearing Machine
Choose a hand-operated straight shear from the actual sheet width, material and cutting cycle. Compare the five supplied GS, KHS and TSC configurations.
- Listed bed widths
- 1000–1250 mm
- Thickness references
- 1.0 / 1.6 mm
- Drive
- Manual
Five models, three different purchasing decisions
| Priority | Supplied option | Check before choosing |
|---|---|---|
| More cutting width | KHS-1250: 1250 mm, 1.0 mm | Actual sheet grade and manual cutting cycle. |
| Higher listed thickness | TSC1010/1.6: 1010 mm, 1.6 mm | The thicker reference does not extend to 1250 mm. |
| Construction choice | GS-1000 steel plate / GS-1000I cast iron | Compare table height, mass and the installation needs. |
Use a real blank to check the working position
Width, reach and support
A 1000 mm bed is a different decision from a 1250 mm bed. Give WinYing the actual sheet width and the finished strip dimensions, including the shortest repeated cuts.
Review how the sheet sits on the table, how it is aligned and how the offcut is handled. Manual drive removes the electrical requirement; it does not establish effortless cutting at every material and thickness.
GS / KHS / TSC Supplied Model Data
| Parameter | GS-1000 | GS-1000I | KHS-1000 | KHS-1250 | TSC1010/1.6 |
|---|---|---|---|---|---|
| SKU | 373177 | 373178 | 373179 | 373180 | 373181 |
| Bed Width | 1000 mm | 1000 mm | 1000 mm | 1250 mm | 1010 mm |
| Cutting Thickness | 1.0 mm | 1.0 mm | 1.0 mm | 1.0 mm | 1.6 mm |
| Construction | Steel Plate | Cast Iron | Steel Plate | Steel Plate | Steel Plate |
| Table Height | 800 mm | 760 mm | 750 mm | 750 mm | 760 mm |
| Packing Size | 155 × 100 × 58 cm | 162 × 102 × 50 cm | 187 × 110 × 69 cm | 212 × 110 × 69 cm | 150 × 105 × 117 cm |
| N.W. / G.W. | 238 / 295 kg | 385 / 448 kg | 400 / 481 kg | 430 / 535 kg | 335 / 390 kg |
The listed thicknesses are source references. The material-strength basis is not supplied, so confirm grade before using them as an order capacity. Net and gross weights are separate shipping references.
When hand operation fits the workshop
Custom and occasional straight cuts
For repair work, duct blanks and flashing, review a representative cut with the planned operator and sheet support. Count positioning and unloading as part of the task.
Repeated production batches
Compare the same blank on a powered shear if repeated handling or manual effort dominates the cycle. Choose from accepted cut quality and usable batch output rather than drive type alone.
Agree a small acceptance pack
- Cut listSheet grade, thickness, full width and finished sizes.
- Edge and dimension checkAgree straightness, burr condition and dimension checks on actual stock.
- InstallationConfirm table height, support space, packed size and the loading arrangement.
Questions to settle before ordering
Which model has the widest bed?
KHS-1250 lists 1250 mm bed width with 1.0 mm cutting thickness.
Do all models cut 1.6 mm?
No. That reference belongs to TSC1010/1.6 at 1010 mm bed width.
Is cast iron supplied on every model?
No. GS-1000I lists cast iron; the other listed models use steel-plate construction.
Can I assume the same rating for stainless steel?
No material-strength basis is confirmed. Provide grade and thickness for review.
What should the trial demonstrate?
Representative positioning, manual cutting, dimensions and edge condition using your actual sheet.
Tell Us Your Manual Shearing Requirements
Send your material, sheet thickness, required cutting width and preferred model so we can recommend the suitable manual shear.