Electric Beading Machine
Choose the LH reference configuration by the required stepped edge or bead/groove, then confirm its own drive and tooling data.
- References
- LH-15 / LH-10
- Sheet entries
- 1.5 / 1.0 mm
- LH-15 power
- 0.75 kW
Two listed configurations, two forming jobs
LH-15 edge / stepped reference
The supplied table lists a stepped or edge-forming profile, 1.5 mm sheet and 0.75 kW. Match the actual profile sample before choosing this row.
LH-10 bead / groove reference
The supplied table lists a bead/groove profile and 1.0 mm sheet. Motor power is not specified; do not copy LH-15 power across.
LH-15 and LH-10 Supplied Data
| Parameter | LH-15 | LH-10 |
|---|---|---|
| Sheet Thickness | 1.5 mm | 1.0 mm |
| Machining Shape | Stepped / edge-forming profile (as supplied) | Bead / groove profile (as supplied) |
| Power | 0.75 kW | Not specified |
| Weight | 90 kg | 50 kg |
| Dimensions | 400 × 860 × 960 mm | 560 × 310 × 970 mm |
These rows are not the same process with two sizes. Keep their profile, power and dimension entries separate; confirm the missing electrical data for the selected configuration.
Describe the result the rollers must create
Profile sample first
Provide the intended bead, groove or stepped section with dimensions and position on the workpiece. Include material and full thickness range.
Check access and downstream fit on the formed part rather than using the general beading name as a tooling specification.
Questions to settle before ordering
Do both models form the same shape?
The source describes different machining-shape references.
Is LH-10 also 0.75 kW?
Its power is not specified in the supplied row. Confirm it separately.
Does the thickness rating apply to every grade?
Confirm material compatibility and tooling for the quoted job.
What sample is useful?
The exact stepped, bead or groove profile and its position on the workpiece.
What acceptance matters?
Profile dimensions, finish, access and required downstream fit.
Tell Us Your Electric Beading Requirements
Send your sheet material, thickness, required forming profile and power supply so we can recommend LH-15 or LH-10.