Manual Beading Machine
Review the TB-12 bead roller by forming position, throat access and the required hand-operated work.
- Model
- TB-12
- Throat
- 200 mm / 8 in
- Motor
- Not required
The 200 mm throat defines profile access
TB-12 hand operation
No motor is listed. Compare the required roller position and operator handling for fitting, repair and shorter-batch work.
Access to the bead line
Throat depth describes reach to the forming position. It is not a 200 mm maximum panel-width statement. Mark the required bead position on the blank.
TB-12 Supplied Specification
| Item No. | 373801 |
|---|---|
| Model | TB-12 |
| Maximum Thickness | 1.2 mm / 18Ga |
| Throat Depth | 200 mm / 8 in |
| Cylinder Speed | Manual |
| Motor Power | Not required |
| Packing Size | 58 × 32 × 62 cm |
| Net / Gross Weight | 46 / 59 kg |
The source lists item 373801, 1.2 mm / 18Ga maximum and 200 mm / 8 in throat. Confirm the actual material standard rather than using gauge as a universal thickness conversion.
Confirm rollers by the finished profile
| Input | Why it matters | Confirm |
|---|---|---|
| Bead shape and position | Profile and throat access | Included rollers |
| Grade and thickness | Forming behavior | Material-specific rating |
| Blank and batch | Handling and repeat work | Support and operator route |
Keep manual and electric references separate
Questions to settle before ordering
Does it need electricity?
The TB-12 reference is hand-operated and lists no motor.
Is throat depth maximum sheet width?
No. It describes access to the forming position.
Is 18Ga the same for every material?
Confirm the actual material standard and thickness.
Are all roller profiles included?
Confirm the required shape and supplied rollers.
Is ETB-12 the same specification?
It is an electric-version reference; do not transfer its drive data to TB-12.
Tell Us Your Manual Beading Requirements
Send your sheet material, thickness and required bead or groove profile so we can confirm whether TB-12 suits your work.