Auto Duct Line 3
Review the downstream machine interfaces before accepting the line configuration.
- Shared width
- 1250 / 1500 mm
- Shared sheet range
- 0.4–1.5 mm
- Package
- Quote-specific
Connect to the existing workshop
Review the downstream machine interfaces before accepting the line configuration.
Three workshop interfaces
Incoming material
Match coil or sheet preparation to the quoted feed configuration.
Prepared panel
Confirm panel size, orientation and handling into the next machine.
Downstream assembly
Review lock forming, flange forming, folding and closing equipment using actual joint drawings.
Trial the handoff
- 01
Map existing machines
Provide their working ranges and joint tooling.
- 02
Prepare sample
Use representative panel dimensions.
- 03
Transfer and assemble
Check handling and mating components.
- 04
Inspect finished duct
Approve the complete construction.
Shared YSDCNC Reference Data
| Parameter | YSDCNC-V-1250 | YSDCNC-V-1500 |
|---|---|---|
| Material Thickness | 0.4–1.5 mm | 0.4–1.5 mm |
| Max. Width | 1250 mm | 1500 mm |
| Max. Working Speed | 15 m/min | 15 m/min |
| Max. Weight of Coiler | 4 × 7000 kg | 4 × 7000 kg |
| Power | 30 kW | 30 kW |
| Machine Weight | 13,500 kg | 14,500 kg |
| Dimensions (L × W × H) | 14 × 5 × 1.5 m | 14 × 5.5 × 1.5 m |
The existing Auto Duct Line 1–6 pages supply the same V1250/V1500 table. These figures are a shared reference, not proof of six distinct equipment packages. Confirm the selected line’s complete machine list, operations and layout.
Questions to settle before ordering
Does the line number establish all included operations?
No. Confirm the equipment list and tooling in the quotation.
Why are the tables identical across six pages?
The existing repository supplies a shared YSDCNC V1250/V1500 reference table. Distinct packages need confirmation.
Can the listed speed define completed duct output?
No. Include setup, changes, transfer and downstream operations.
Can it match existing workshop machines?
Provide working ranges, panel drawings and joint details for interface review.
What should I send WinYing?
Material, thickness, duct drawings, batch mix, existing machines and site utilities.
Need an Automatic Duct Production Line?
Tell us your material, sheet thickness, duct size and production requirements. We will review the application and respond with suitable equipment information.