TDF Flange Forming Machine
Form the panel-edge TDF profile and select T-12 or T-15 using the actual material range and connection drawing.
- Reference models
- T-12 / T-15
- Flange height
- 35 ± 0.5 mm
- Motors
- 3 / 4 kW
Two supplied edge profiles
Choose the material range before the motor size
| Model | Galvanized reference | Stainless reference |
|---|---|---|
| T-12 | 0.5–1.2 mm | Confirm separately |
| T-15 | 0.8–1.5 mm | 0.4–1.0 mm |
T-12 and T-15 Model Comparison
| Model | Bend Thickness | Flange Height | Motor Power | Weight | Dimensions |
|---|---|---|---|---|---|
| T-12 | 1.2 mm | 35 ± 0.5 mm | 3 kW | 875 kg | 3000 × 850 × 1250 mm |
| T-15 | 1.5 mm | 35 ± 0.5 mm | 4 kW | 950 kg | 3000 × 850 × 1250 mm |
Table bend-thickness entries and the separately listed material ranges must be read together. Confirm grade, flange profile and electrical standard before ordering.
Check the connection as an assembly
- 01
Prepare edge
Use the approved panel and material.
- 02
Form flange
Use the matching TDF tooling.
- 03
Fit components
Test intended corners, cleats and sealing.
- 04
Inspect joint
Check the complete duct-end connection.
Questions to settle before ordering
Is 1.5 mm valid for stainless steel?
The T-15 source separately lists stainless at 0.4–1.0 mm. Do not transfer the galvanized maximum.
Does every TDF corner fit?
Match the actual profile and test intended corners/cleats.
Are both hem profiles described?
The reference describes TDF Hem and Elbow Hem; confirm tooling for the purchased model.
Does this close longitudinal seams?
Flange forming and longitudinal seam closing are different operations.
What is needed for a quote?
Grade, thickness range, flange drawing/components, utilities and production requirements.
Need a TDF Flange Forming Machine?
Tell us your material, sheet thickness, flange profile, working width and production requirements. Send a drawing or sample details if available.