Auto Duct Line 1
Grade, thickness and coil handling define the starting configuration.
- Shared width
- 1250 / 1500 mm
- Shared sheet range
- 0.4–1.5 mm
- Package
- Quote-specific
Coil and material acceptance
Grade, thickness and coil handling define the starting configuration.
Material brief
Send galvanized or other specified grade, thickness range, surface condition and representative samples. Confirm that the quoted tooling covers them.
Coil handling
The shared reference lists four 7,000 kg coilers. Confirm included coilers, actual coil dimensions, loading access and the supplied handling procedure.
Accept a representative panel
- 01
Prepare coil
Check material identification and supplied coil limits.
- 02
Set the panel
Confirm dimensions and tooling setup.
- 03
Run the sample
Inspect flatness, surface and the required operations.
- 04
Record acceptance
Keep the approved settings and sample drawing.
Shared YSDCNC Reference Data
| Parameter | YSDCNC-V-1250 | YSDCNC-V-1500 |
|---|---|---|
| Material Thickness | 0.4–1.5 mm | 0.4–1.5 mm |
| Max. Width | 1250 mm | 1500 mm |
| Max. Working Speed | 15 m/min | 15 m/min |
| Max. Weight of Coiler | 4 × 7000 kg | 4 × 7000 kg |
| Power | 30 kW | 30 kW |
| Machine Weight | 13,500 kg | 14,500 kg |
| Dimensions (L × W × H) | 14 × 5 × 1.5 m | 14 × 5.5 × 1.5 m |
The existing Auto Duct Line 1–6 pages supply the same V1250/V1500 table. These figures are a shared reference, not proof of six distinct equipment packages. Confirm the selected line’s complete machine list, operations and layout.
Questions to settle before ordering
Does the line number establish all included operations?
No. Confirm the equipment list and tooling in the quotation.
Why are the tables identical across six pages?
The existing repository supplies a shared YSDCNC V1250/V1500 reference table. Distinct packages need confirmation.
Can the listed speed define completed duct output?
No. Include setup, changes, transfer and downstream operations.
Can it match existing workshop machines?
Provide working ranges, panel drawings and joint details for interface review.
What should I send WinYing?
Material, thickness, duct drawings, batch mix, existing machines and site utilities.
Need an Automatic Duct Production Line?
Tell us your material, sheet thickness, duct size and production requirements. We will review the application and respond with suitable equipment information.