1530 120A CNC Plasma Cutting Machine
Review the 1530 120A plasma table around your nested parts, cut-quality requirements and complete source, air and control package.
- Work area
- 1500×3000 mm
- Source
- Huayuan 120A
- Control
- STARfire / Starcam
1530 table: start with the part geometry
Profiles instead of straight blade cuts
The 1530 CNC table follows programmed X/Y paths for contours, openings and nested parts. Its supplied work area is 1500×3000 mm; the listed 150 mm Z area is torch travel, not a plate-thickness rating.
Send a representative nest with holes, internal corners and the dimensions that matter. Review the usable sheet area and how the cut parts will be removed.
A confirmed component chain
| Component | Source configuration | Procurement check |
|---|---|---|
| Plasma source | Huayuan 120A | Exact source configuration and material process data. |
| Control / programming | STARfire / Starcam | Accepted drawing and cutting-program workflow. |
| Motion | Stepper motor | Trial programmed dimensions on the actual plate. |
| Torch height | Automatic control | Included height-control hardware and setup procedure. |
| Display | 7-inch LCD | Operator interface and program-transfer method. |
Separate severing capacity from the finished edge
Thin or detailed parts
Include the smallest holes, narrow features and closely spaced parts in the trial. Agree which geometry can be accepted directly and where later finishing is needed.
Thicker carbon-steel profiles
Agree cut quality, process settings and any finishing allowance at the actual thickness. Do not combine the maximum thickness with the listed maximum 12,000 mm/min speed.
1530 120A Supplied Technical Data
| Model | 1530 120A Plasma Cutting Machine |
|---|---|
| X,Y Working Area | 1500 × 3000 mm |
| Z Working Area | 150 mm |
| Packing Dimension | 4000 × 2280 × 1850 mm |
| Machine Bed | Very thick steel structure |
| Machine Power | 8.5 kW |
| Working Voltage | 380 V / 3 Phase / 60 Hz |
| Reposition Precision | 0.02 mm |
| Processing Precision | 0.1 mm |
| Maximum Cutting Speed | 12,000 mm/min |
| Torch Height Control | Automatic |
| Cutting Thickness | Max. 25 mm carbon steel |
| Plasma Power Supply | Huayuan 120A plasma source |
| Control System | STARfire |
| Motors | Stepper motor |
| Software | Starcam |
| Weight | 1400 kg |
| Plasma Air Pressure | Max. 0.8 MPa |
| Working Temperature | -10°C to 60°C; Relative Humidity 0–95% |
| LCD Display | 7 inches |
The supplied 0.02 mm reposition and 0.1 mm processing precision are source figures. They are not unconditional finished-part tolerances for every thickness and geometry. Confirm test conditions and an accepted sample.
Prepare the site around the complete cutting package
- Electrical supplyThe reference is 380 V, three phase, 60 Hz. Confirm any destination variation and the complete installed load.
- Air supplyMaximum 0.8 MPa is listed. Confirm required operating pressure, flow and air-treatment equipment.
- Cutting environmentAgree the supplied fume-handling arrangement, table type and installation space.
- TransportThe listed packing dimensions are 4000×2280×1850 mm; confirm the current packed shipment.
Questions to settle before ordering
Is 150 mm the cutting thickness?
No. It is the listed Z working area; the maximum carbon-steel thickness reference is 25 mm.
Can it cut 25 mm at 12,000 mm/min?
The separate maxima do not establish that combination. Obtain process data for the actual thickness.
Does reposition precision guarantee final part tolerance?
No. Agree finished-part measurements and test conditions on representative cuts.
Is the air requirement complete?
Only a maximum pressure is listed. Confirm flow, treatment and operating conditions.
What should a sample nest include?
Your actual grade and thickness, critical holes and contours, finished dimensions and edge requirements.
Tell Us Your Plasma Cutting Requirements
Send your material, maximum thickness, sheet size, required cut quality, power standard and production needs so we can confirm the suitable plasma configuration.