Tube-Mold Spiral Duct Machine
Explore our tube-mold spiral duct machine. Choose a tube-mold system around the diameters you produce and the forming heads actually supplied.
Spiral duct production with diameter-specific forming heads requires tool planning and changeovers. Confirm supplied molds and material-thickness limits.
The tube-mold spiral duct machine price depends on the diameter range, number and sizes of forming heads, material capacity and changeover requirements. Give WinYing, a supplier in China, your diameter list and confirm the manufacturer, factory supply terms and molds included. Additional forming heads should be clearly identified in the quotation. Compare related options: Spiral Duct Machines.
- Diameter range
- Φ100–Φ1600 mm
- Listed power
- 16 kW
- Control
- Touchscreen

Tube-Mold Spiral Duct Forming: Mold and Diameter Planning
A tube-mold spiral duct machine uses model-specific forming tooling to produce spiral-seam round duct. Check the required duct diameters, mold availability, material and thickness limits, coil handling and installation requirements before ordering. Confirm the exact mold list and changeover procedure rather than assuming one mold covers every diameter. Compare steel-strip spiral duct equipment, the spiral duct process guide and the machine category.
This tube-mold spiral tube forming machine produces round spiral-seam duct using forming-head molds selected for the required diameters. Buyers searching for a spiral tube making machine or spiral pipe forming machine should confirm that the finished product is spiral-seam ventilation duct and that the quoted mold list matches their production sizes.
When comparing a spiral duct machine vs spiral tube former for spiral duct machine for round duct production applications, ask suppliers to identify the actual forming method and tooling rather than relying on overlapping product names. The reference tube-mold configuration lists Φ100–Φ1600 mm duct diameters, galvanized sheet thickness of 0.5–1.2 mm and stainless steel thickness of 0.4–1.0 mm; not every mold is necessarily included. For a spiral duct machine vs round duct rolling machine comparison, note that a round duct rolling machine uses a different production method; compare the required spiral seam and finished duct specification before choosing equipment.
Plan the actual mold list
Diameter portfolio
List every required duct diameter within the supplied Φ100–Φ1600 mm range. The range does not establish that every forming head mold is included.
Changeover demonstration
Choose two recurring sizes and observe mold exchange, setup and first accepted tube. Include the change in the production estimate.
Coil, head and discharge are three installation interfaces
Listed vertical uncoiler maximum load; confirm the actual coil.
Supplied material width; match grade and thickness.
Main machine reference size; add the separate discharge rack and access.
Tube-Mold Supplied Parameters
| Diameter Range | Φ100–Φ1600 mm |
|---|---|
| Thickness Range | Galvanized plate: 0.5–1.2 mm Stainless steel: 0.4–1.0 mm |
| Material Width | 137 mm |
| Uncoiler | Vertical type, maximum load: 1200 kg |
| Sealing & Locking | Outer surface of the pipe |
| Feeding Speed | 0–35 m/min, adjustable |
| Cutter | Rolling type cutting |
| Power System | Pneumatic power for cutting and turning material; hydraulic power for discharge and roller compression |
| Forming Head Mold | Made of steel (aluminum alloy casting optional) |
| Total Weight | 2000 kg |
| Equipment Size | Main machine: 3.4 × 1.85 × 1.5 m Discharge rack: 2.1 × 1.2 × 1.1 m |
| Total Power | 16 kW |
| Power Supply | 380 V / 50 Hz / 3 ph (other power supply optional) |
| Control Console | Touchscreen |
The source separates galvanized 0.5–1.2 mm and stainless 0.4–1.0 mm. Feeding speed 0–35 m/min is not finished duct output. Confirm steel molds, optional aluminum-alloy casting and included quantities.
Confirm both power arrangements
Pneumatic functions
The source describes pneumatic cutting and material turning. Obtain the air-supply details for the quoted package.
Hydraulic functions
Discharge and roller compression are described as hydraulic. Confirm the exact utility and service scope rather than inferring it from total power.
Questions to settle before ordering
How is diameter changed?
The supplied system uses a corresponding forming head mold.
Are all molds included?
Confirm the actual diameter list and quantities in the quotation.
What steel thickness ranges are listed?
Galvanized 0.5–1.2 mm and stainless 0.4–1.0 mm, subject to grade/configuration review.
Does 16 kW describe all utility needs?
No. Confirm electrical, pneumatic and hydraulic requirements for the supplied scope.
What layout should I send?
Coil loading/storage, main-machine area, discharge support and service access.
Tell Us Your Spiral Duct Requirements
Send the duct diameters you need, material and thickness so we can confirm the machine and forming mold configuration.
