Pneumatic Duct Seaming Machine
Confirm HFL-12 workpiece geometry, prepared seam and utilities as a single quotation scope.
- Model
- HFL-12
- Sheet reference
- 0.5–1.2 mm
- Listed power
- 4 kW
Confirm shape and length before utilities
Air operation still needs a complete utility scope
Quoted air requirements
Obtain working air pressure, consumption and connection details for the selected machine. The pneumatic label alone does not provide those missing figures.
Listed electrical power
The HFL-12 table also lists 4 kW. Confirm the voltage/frequency and drive arrangement rather than assuming pneumatic means no electricity.
HFL-12 Original Reference Data
| Model | HFL-12 |
|---|---|
| Sheet Thickness | 0.5–1.2 mm |
| Round Duct Length | 1000–1500 mm |
| Power | 4 kW |
| Weight | 710 kg |
| Dimensions (L × W × H) | 1210 × 970 × 2290 mm |
Keep the supplied 0.5–1.2 mm sheet and 1000–1500 mm length entries. Confirm the geometry and material basis; do not use the inconsistent label to infer another application.
Prepared joint to completed duct
- 01
Provide sample
Supply the mating profile and duct section.
- 02
Review loading
Check clearance and support for the selected geometry.
- 03
Demonstrate closing
Use the required grade and representative lengths.
- 04
Check assembly
Inspect the completed joint and specified sealing.
Questions to settle before ordering
Is the quoted configuration rectangular or round?
The description and length label differ. Obtain the actual model drawing and geometry confirmation.
Is electrical supply unnecessary?
No. The supplied reference lists 4 kW as well as pneumatic operation.
What air pressure is required?
No numerical requirement is supplied in this table; request the configuration-specific utility data.
Do matching thicknesses prove seam fit?
No. Provide the joint and completed duct geometry.
What should acceptance demonstrate?
Representative complete joints with agreed dimensions, closure and required sealing checks.
Tell Us Your Duct Seaming Requirements
Send your rectangular duct size, length, material, sheet thickness, seam profile and required power supply so we can confirm the suitable configuration.