Vertical lifting table milling and drilling machine can realize the longitudinal automatic feeding of the table, reducing labor intensity, improving processing accuracy and surface finish. It has good wear resistance. The milling head is installed on the front of the sliding arm and can move forward and backward. It can not only rotate 45 degrees left and right in the vertical plane, but also 360 degrees on the bed. It has good processing universality.
WY6350A drilling and milling machinecan realize the longitudinal automatic feeding of the table, reducing labor intensity, improving processing accuracy and surface finish. It has good wear resistance. The milling head is installed on the front of the sliding arm and can move forward and backward. It can not only rotate 45 degrees left and right in the vertical plane, but also 360 degrees on the bed. It has good processing universality.
Specifications | Units | WY6350 |
Spindle taper |
| ISO40 |
Distance from end of spindle to working table | mm | 90-390 |
Distance from the center of horizontal axis to the working table | mm | 0-300 |
Distance from the center of vertical axis to the vertical guide surface of bed | mm | 200-500 |
Spindle speed range | r/min | (8steps)115-1750(V) (12steps)40-1300(H) |
Table size | mm | 1200×280 |
Table travel | mm | 600/320/300 |
The Distance from the Center of Horizontal Axis to the Plane of Suspension Beam | mm | 175 |
Maneuvering feed speed of worktable(X/Y/Z) | mm/min | 22-555(8steps)810(feed) |
Vertical Maneuvering Lift Speed of Workbench | mm/min | 560 |
Number/width/spacing of T-grooves in worktable | mm | 3/14/70 |
Main motor power | kw | 1.5/2.2(V);2.2(H) |
Table feed motor power | W | 750 |
Lift feed motor power | W | 750 |
Cooling pump motor power | W | 40 |
Weight | kg | 1450/1550 |
overall dimension | mm | 1680×1480×2150 |
