The main performance characteristics:
1. Machine tool head box and bed, tailstock, Supporting plate, etc. the combination of surface between manual scraping, machine to undergo a rigorous inspection, effectively ensure the machine tool accuracy and stability.
2. Machine adopts high strength cast iron, copper and chromium special materials are added, the bed width 400mm, bed rail quenching depth up to 4mm, effectively improves the agreeability and stability of the machine.
3. The machine tool bed head box lubrication uses the pump to carry on the circulation forced lubrication, in view of the south hot weather, has guaranteed the bed head box cleanliness and the heat radiation characteristic, has effectively extended the bearing and gear's service life.
4. Wafangdian Bearing is used in machine tool spindle, the spindle through hole diameter 80mm, machine tool gear with precision grinding, can effectively improve the hardness of the gears, to reduce noise of the machine.
5. Machine tool uses the domestic brand lead screw, the silk mother uses the high quality bronze alloy to guarantee the wear-resisting property and the precision maintenance.
6. The machine adopts high strength four station turret shank size: 25x25mm.
7. CA series ordinary horizontal lathe is used to turning internal and external cylindrical surface, conical surface, and other rotating surface, turning various metric and inch, modulus and pitch thread, and the pitch diameter of the thread and pull the drilling and oil tank etc., is general very strong horizontal lathe, Widely applicable batch processing of various shaft and disc parts.
8. Handy machine operator concentration, slide plate is provided with a quick moving mechanism. Using single handle operation, humanization.
9 .The rigidity of the machine tool structure and the transmission stiffness are higher than the general lathe, the power utilization rate is high, which is suitable for the strong cutting.
10. Before leaving the machine tool factory, the machine tool is tested strictly according to the inspection procedure, and the machine tool is tested to ensure that the machine tool has good stability and reliability.
Product main technical paramete
|Type || |
|Max. swing over bed ||400mm ||500mm ||610mm ||660mm ||800mm |
|Max. swing over carriage ||210mm ||300mm ||370mm ||400mm ||540mm |
|Max. swing in gap ||630mm ||720mm ||830mm ||880mm ||1020mm |
|Max. effective length in gap ||210mm |
|Max. length of workpiece ||750/1000/1500/2000/2200/3000/4000mm |
|Width of bed ||400mm |
|Section of turning tool ||25×25 mm |
|Main spindle motor ||7.5kw(10HP) |
|Spindle speed ||16--1400rpm(24step) |
|Spindle bore ||52mm (80mm),(105mm) |
|Spindle taper || |
|NO. of feed || |
(64 kinds)(for each)
|Range of metric threads || |
(1-192mm) (44 kinds)
|Range of inch threads || |
|Range of module threads || |
0.25-48 (module 39 kinds)
|Range of diametral pitch threads || |
1-96DP (37 kinds)
|Max. tailstock spindle travel ||150mm |
|Tailstock spindle diameter ||75mm |
|Taper of tailstock spindle centre hole || |
1-96DP (37 kinds)
|Packing dimensions (L*W*H) |
|Overall dimensions for 750mm ||2440×1140×1750mm |
|Overall dimensions for 1000mm ||2700×1140×1750mm |
|Overall dimensions for 1500mm ||3200×1140×1750mm |
|Overall dimensions for 2000mm ||3700×1140×1750mm |
|Overall dimensions for 2200mm ||4030×1140×1750mm |
|Overall dimensions for 3000mm ||4800×1140×1750mm |
|Overall dimensions for 4000mm ||5680×1140×1750mm |
|Weight (kg) |
|Overall dimensions for 750mm ||2100 ||2170 ||2300 ||2400 ||2520 |
|Overall dimensions for 1000mm ||2200 ||2260 ||2380 ||2580 ||2720 |
|Overall dimensions for 1500mm ||2380 ||2450 ||2577 ||2830 ||3000 |
|Overall dimensions for 2000mm ||2750 ||2800 ||3000 ||3050 ||3300 |
|Overall dimensions for 2200mm ||2800 ||3000 ||3150 ||3400 ||3500 |
|Overall dimensions for 3000mm ||3300 ||3500 ||3600 ||4000 ||4220 |
|Overall dimensions for 4000mm ||3500 ||3800 ||3950 ||4600 ||4900 |
Living Center 3-jaw chuck
Dead Center Toolpost protection
Steady rest Chuck protection
Follow rest Leading screw guard
Foot plate Cooling system
Face plate Lubrication system
Back guard Work lamp
Taper attachment 4 jaw chuck
Digital Readout Quick Change Toolpost
As shown in below