 |
The spindle is variable speed, and is directly connected witn the main motor through time-belt, which reduced the noise greatly.The spindle speed can be adjusted variably during its range of 0-1500r.p.m. Easily operating and reading.Spindle lubricating with grease, no oil leakage.New design and little of Forward & Reverse Feeding Device, easily for operating.Vector Frequency Converter and Variable Frequency AC motor can get high torque cutting under low speed.High strength and high rigidity casting iron.V-way bedways induction hardened and ground.
Product Description
* High quality steel, ground and hardened gear inside headstock.
* Easy and fast operating gearbox.
* Enough strong power motor.
* Various thread cutting function
Capacities: | |
Swing over Bed | 210mm |
Swing over Cross Slide | 110mm |
Distance Between Centers | 400mm |
Width of Bed | 100mm |
Headstock: | |
Hole Through Spindle | 38mm |
Taper in Spindle Nose | MT5 |
Number of Spindle Speeds | Variable |
Range of Spindle Speeds | 50-2500RPM |
Feeding and Threading: | |
Number of Metric Threads | 10 |
Range of Metric Threads | 0.5-3mm |
Number of imperial Threads | 8 |
Range of imperial Threads | 8-44 T.P.I. |
Range of Longitudinal Feed | 0.1-0.20mm |
Compound and Carriage: | |
Tool Post Type | 4-Way |
Maximum Compound Slide Travel | 55mm |
Maximum Cross Slide Travel | 75mm |
Maximum Carriage Travel | 276mm |
Tailstock: | |
Tailstock Spindle Travel | 60mm |
Taper in Tailstock Spindle | MT2 |
Miscellaneous: | |
Main Motor | 230V/1Ph/50Hz |
Dimension: | |
Size | 740*390*370 |
Weight | 65KGS |
