 |
Turret punch presses are produced as a closed type rigit Steel construction into a rigit structure, the finite analysis system was used in the design and simulation process to allow minumum deflection during operation. No deflection between the turret and tools occurs during the punching process and it increase tool life. TPP series turret punch presses has 2 models with 27 station/700 stroke and with 33 station/900 stroke which helps to finish all the work at onces even on very complicated sheet products.
Product Description
• +/- 30m/min positioning speed.
| Name | Parameter | Unit | Remarks |
| Punching pressure | 300(30) | KN(T) | |
| Rack structure | O closed- type servo drive | mm | Electric furnace tempering |
| Maximum processing sheet size | X-axis 2500 Y-axis 1250 | mm | Secondary positioning can process 5000mm |
| Maximum processing sheet thickness | 6 | mm | |
| Maximum diameter of one punch | Φ88.9 | mm | Non-standard |
| Highest punching frequency | 800 | times/min | |
| The number of control axis | 5(X,Y,Z,T,C) | PCs | |
| Form of mold | Long guide 85 series international standard mold | ||
| Turret station distribution | A,B,C,D | Standard | Non-standard |
| Processing life of mold | 500,000 | times | |
| Repositioning cylinder | 2 | set | |
| Maximum feeding speed | X-axis 80 Y-axis 80 | m/min | |
| Workbench structure | Seamless brush / Universal steel ball table | Stainless steel edging | |
| Maximum turret speed | 40 | rpm | |
| Re- positioning accuracy | ±0.02 | mm | |
| Maximum load weight | 150 | Kg | |
| Maximum output power | 16 | KW | |
| Air pressure | 0.55 | MPa | |
| Voltage | 380±5% | V | |
| Overall dimension | Length × width × height 5000×5000×2100 | mm |
